How to maintain the pill machine

Artificial way pharmaceutical pill not only low efficiency and is very difficult to guarantee health rating standards, so business pill machine becomes the first choice for some pharmaceutical pill. Small Chinese medicine pill machine can production concentrated pill, honey pill, water pills, water honey pills, and can also provide coating and drying function so that the pill made of uniform and beautiful. Traditional Chinese medicine pill machine is made of stainless steel, in accordance with the GMP standard. With the characteristics of small size, low energy consumption, high efficiency, low noise, no pollution, simple operation, safety and reliability, etc..

But only then a good machine must pay attention to the usual maintenance, proper maintenance can avoid the pollution of the pill, reduce wear and tear of the machine, delay the time of the machine's rust, greatly increase the service life of the machine.

So Guangdong Rich Packing Machinery Co., Ltd., we summarizes the nine pill making machine use matters needing attention, hoping to help:

1, This machine is suitable for the environment temperature of -5 degrees to 40 degrees Celsius, the relative humidity is less than 90%, the humidity is too high will lead to surface metal oxide. Around no conductive dust and corrosion of metal gas, placed in a ventilated, clean place.

2,The operation, the work table should have no other unrelated items. Pelletizing machine placed in the safe table, to confirm the power supply voltage, the power supply should be close to the table, the power socket to has a reliable grounding wire, is strictly prohibited forced drawing power line, to prevent human overturned and fell bad pill making machine and other accidents.

3, The machine after use, as shown and remove the hexagon screws and open to roller as the boundary of the upper and lower two parts, take four roller, with medical alcohol scrub clean. According to the need of replacement pill or rollers of different specifications, can be installed according to the reset.

4 The methods of preparation, proportion of pills, water pills, powder coating production method for mixing pill formulation.

5, The pelleting machine in switch on the mobile phone in the use, is strictly prohibited roller pill and sliver clutch roller in contact with hands and brush or other tools, to avoid finger pricks, is strictly prohibited in the supreme cover, gear box cover under the protection, EDM of pills, to avoid unnecessary accidents.

6, in case of power line damage (such as bare exposure), must use special power line. To the local office of the maintenance department to buy replacement. In case of switch or socket failure, must stop using, no change of the line to continue to use, should be promptly replaced with the specifications of the beginning or socket, in order to avoid mechanical, personal accident.

7, Cleaned with medical alcohol, exchange of pill and roller sliver clutch roller must cut off the total power, pull out the power plug.

8, Water pills coated when not in use, can be directly washed, clockwise rotation, you can pull it out. The exposed part of the shaft of the water pill coating device should be coated with a small amount of clean edible oil to prevent the generation of floating rust. Direct water washing machine or electric heater is prohibited. When the machine is not in use, it must be placed in a dry, clean and ventilated place. In the use of electric heaters, is strictly prohibited to contact with water in order to prevent conductive, resulting in electric shock, such as accident.

As long as the usual strict compliance with the maintenance rules can ensure that the life of the pill machine can greatly exceed the warranty period, saving the cost of investment in the factory. If the majority of customers in the pelleting machine in the production process problems, welcome to send a telegram to Rachel Packing Machinery Co., Ltd. Guangdong consulting. We will strive to provide you to answer.