CH Series Trough-type Mixer Maintenance

CH Series Trough-type Mixer Maintenance

Pharmaceutical equipment supplier and solution provider guangdong ricci reminds you that slot mixer maintenance and maintenance should be aware of the following problems:

Reducer lubricants only allowed to choose worm gear oil, after the activation of two months, the oil should be replaced, after every six months, please change oil.

Cleaning：

1 detergent: 0.03% clean water, drinking water and purified water.

2 the conditions, frequency and method of cleaning implementation:

2.1 At any time with the equipment cleaning special dishcloth to wipe the surface of the dust, such as dirt, stained 0.03% wash clean water, wipe the surface of the equipment, visual inspection without dirt, and then use clean equipment clean cloth wipe clean.

2.2 pleas promptly clear the equipment around the accumulation of ash and floor powder every day

2.3 After remove the adsorption in the direct exhaust filter on-line powder every day,

2.4. The equipment should be cleared when changing varieties or changing specifications.

2.4.1 Use drinking water to scrub the exterior surface of the equipment.

2.4.2 material trough to add the right amount of drinking water, stirring up to 5 minutes, let the equipment operation of mixing paddle and tank wall cleaning, sewage discharged, according to this method repeated several times, until the visual inspection of the last product residue, rinse with drinking water once, and then rinse with purified waters.

2.4.3 Use clean equipment to clean the special rag dry tube and the residue of water stains everywhere, until the barrel drying.

2.4.4 cut off the power supply.

3. Precautions: Cleaning treatment should prevent water directly immersed in electrical parts.

Guangdong ruiqi CH - 20 trough type mixing machine of mixture of wide adaptability, suitable for mixing powdery or paste material, make different qualitative material mixing, especially suitable for high uniform requirements, material mixing raw materials of different proportion. It is widely used in medicine, food, chemical industry, building materials, feed etc. 

Product features 

The slot and blade of the slurry are in reverse operation, which solves the problems such as low uniformity and Angle of death due to the different proportion of materials. 

The whole machine is made of stainless steel and conforms to GMP requirements. 

Manual pouring and convenient operation. 

The machine is compact, small and convenient to clean up. 

Welcome friends who need to contact us.