The composition of automatic capsule filling machine

The composition of automatic capsule filling machine

Position of automatic hard capsule filling machine:

During the operation of the automatic capsule filling machine, the capsules in the capsule material bucket in the first two stations will enter the capsule feeding plate one by one vertically through the capsule funnel. First, the capsule will be pushed to the outer end of the rectifying block by the horizontal fork. Then, the cap and the body will be separated under the action of the vacuum suction. In the third station, the lower module descends and moves outward under the action of the track. In the fourth station, the pellets are filled. The pellets in the hopper are sent to the capsule body in the lower module by opening and closing the upper and lower switch plates. The fifth station is the transition station; In the sixth station, the residual capsules which could not be separated from the cap body were removed with the blow pipe, and the remaining capsules were blown into the waste capsule for collection and treatment. In the seventh station, the module moves inward under the action of the track and rises at the same time. In the eighth position, the locking push rod rises under the action of CAM to lock the filled capsule. In the ninth station, the discharge push rod rises under the action of the CAM to push out the locked capsule for collection. After the 10th station vacuum cleaner cleans the mold hole, it enters the next cycle again.

The structure of the automatic capsule filling machine is composed of an empty capsule feeding device, a capsule distribution device, a powder feeding device, a measuring disk mechanism, a capsule filling and sealing mechanism, a main transmission mechanism in the box and an electrical control system.

1) automatic powder hard capsule filling machine empty capsule feeding device: composed of hopper and conveying pipeline, it mainly stores the empty capsules and makes the empty capsules enter the capsule division unit one by one vertically.

2) capsule distribution device of small capsule filling machine: make the empty capsule enter into the optional fork of the distribution device, the optional fork downward movement will send down six capsules, and the rubber cap on. Meanwhile, the vacuum separation system flows the capsule into the module and separates the body cap.

3) powder blanking device of hard capsule filling machine: it is composed of powder bucket, powder bucket screw, blanking conveying pipe, etc. It mainly controls the powder stored on the metering plate under the action of screw and stirring.

4) metering disc mechanism: the metering disc specification matched according to the capsule specification and loading quantity. The powder was filled and compacted five times in the intermittent rotating measuring tray and pushed into the capsule of the lower module.

5) capsule filling and sealing mechanism: when pushed into the lower capsule body of the medicine column capsule, the rubber cap of the upper and lower modules and the lower capsule body are pushed upward to make the capsule body buckle.

6) main transmission mechanism in the box: the motor, box type forkson intermittent rotary mechanism, gear pair, deceleration, CAM pair and chain transmission mechanism are used in the box to complete the power required for the execution work. Meanwhile, the frequency conversion motor can achieve the frequency conversion speed regulation function.

7) electrical control system: PLC system controls and displays the technological elements of each capsule filling.