Introduction to the semi-automatic capsule filling machine

Semi-automatic capsule filling machines are also known as capsule bundling machines, capsule filling machines and capsule filling devices. The semi-automatic capsule filling machine is divided and repeatedly improved on the basis of the capsule filling machine. The semi-automatic capsule filling machine arranges the cap and the body of the machine. The arrangement of the machine and the locking station are combined into one, reducing the size and floor space. The semi-automatic capsule machine has many advantages such as fast capsule arrangements, high output, straightforward operation, maintenance and upkeep, and low power consumption. The semi-automatic capsule filling machine requires manual assistance for powder filling. The conjoined capsule machine is a capsule filling liner for hospital preparation rooms, medium and research institutes.

The working principle and operation method of semi-automatic capsule filling process machine: semi-automatic capsule filling machine by pre-treatment of integrated parts, adding a certain proportion of pure water, medical bone gum solid particles, additives, vitamins, glycerin, etc. After 70-80 degrees Celsius low temperatures cycle mixing glue, after a period of time, the glue solution will be vacuumed. After removing the air bubbles and a certain amount of water from the glue, the gelatine is put into a bucket of gelatine and put into a semi-automatic capsule filling machine. The frame of gelatine is heated left and right and then placed into the mould of the main drum to cool it down to a solid state. After passing through the left and right moulds of the head, the solid gelatine is injected into the gelatine through the spray body and the finished granules are fed into the drying system, which is dried at low temperature by means of a conveying belt.

However, it also has its drawbacks, mainly in its desiccation system: in terms of equipment structure, the drying system of the semi-automatic capsule filling machine is designed on the basis of manually rotating general drying equipment. The method adopted is manual drying. Under normal conditions, this method is difficult to achieve the initial setting requirements for soft capsules. As the speed of the dryer is difficult to adjust during operation and cannot be turned over regularly, the initial speed is too fast and the start-up impact is too high, resulting in an impact on the soft gelatin particles and an increase in the crushing rate to 25 % . About, resulting in poor forming effect in the forming stage.

The semi-automatic capsule filling machine uses a new side-mounted operating platform and a new ten-station fully sealed intermittent turntable construction with one-way movement of the upper and lower templates. The closed structure ensures that the product is not affected by the lubricant and meets GMP requirements. Stable and other characteristics.Professional and precise manufacturing of high quality capsule filling machine, to achieve 5S management, zero defects, simple operation, in line with the pharmacopoeia compilation and GMP standards, pharmaceutical plants, food factories, scientific research institutes, medical suitable for pharmaceutical plants, hospital preparation departments, laboratories, health care plants and other units of exceptional use.