Common Fault Solutions For Capping Machines

The capping machine is main purpose is to tighten and loosen the caps of plastic bottles and glass bottles. The capping machine has a wide range of applications and is a very common packaging machine. It is usually used in conjunction with a tablet counting machine.

With the gradual strictness of market packaging and the gradual diversification of packaging styles, people have also put forward higher requirements for the capping machine, and the pressure of the capping machine has strict sizes, from simple manual capping to mechanical Automatic capping, high, medium, and low-end products of different levels meet the needs of customers for different capping. Screw caps on bottles of different materials.

The general problems and solutions in the work of the capping machine can refer to the following items:

　　1. The failure of the automatic switch caused by the movement of the micro switch or the photoelectric switch. In the event of such a failure, the working position of the position switch or the photoelectric switch can be adjusted, or the switch can be exchanged.

　　2. The start-up current caused by the short circuit of the electric stage winding and the shell and the short circuit of the electric idea connection and the ground wire can be used to check the motor on the one hand, and check whether the related wires are loose on the other hand.

　　3. The acceleration time of the automatic capping machine is too short and the electric shock capacity exceeds the capacity of the inverter. The overcurrent fault during acceleration can extend the setting time of the value appropriately, and the capacity of the electric idea cannot be changed arbitrarily.

4. Excessive voltage during operation caused by excessive power supply voltage changes can be easily solved by adding a reactor to the power input or appropriately reducing the power supply voltage.