Methods Of Prolonging The Service Life Of Automatic Tablet Press Machine

Methods Of Prolonging The Service Life Of Automatic Tablet Press Machine

Guangdong Ruiqi automatic tablet press is mainly used for tablet production in the pharmaceutical industry. It is an automatic continuous production equipment for pressing granules into circular, irregular and graphic tablets with words and symbols.

Operating instructions for rotary tablet press:

1. Before the tablet press is used, it is necessary to repeatedly check the quality of the die, whether there are edge defects, cracks, deformation and incomplete tightness, and whether the device is complete and in good condition.

2. The automatic tablet press checks whether the powder of the granular raw material is dry and the powder content in the particles does not exceed 10%. Do not press the unqualified ones hard, otherwise the normal operation, service life and raw material loss of the tablet press will be affected.

3. For the initial test run of the rotary tablet press, the pressure shall be adjusted well, the powder shall be poured into the bucket, the hand wheel for test run shall be turned by hand, and the filling and pressure shall be adjusted at the same time, so as to gradually increase the weight and hardness and softness of the tablet to meet the requirements of the finished product. Then, the motor shall be started first, and then the clutch shall be opened for formal operation and production. During the production process, the quality of the tablet shall be sampled regularly to see if it meets the requirements, and adjustment shall be made if necessary.

4. The choice of tablet machine speed has a direct impact on the service life of the tablet press. Because the property viscosity of raw materials, the size and pressure of tablet diameter cannot be uniformly specified in use, the structure of the tablet press is a stepless speed change device, which is slow and suitable for pressing minerals, plant hormones, large diameter, poor viscosity and other materials that are difficult to form quickly. It is suitable for pressing and bonding materials with good lubricity and easy forming. Therefore, the user must decide according to the actual situation.

5. The management personnel must be familiar with the technical performance, internal structure, operating principle of the control mechanism of the tablet rotary tablet press and shall not leave the work place during operation. In order to prevent damage to the machine parts due to failure and ensure safe production.

6. During the use of the automatic rotary tablet press, pay attention to whether the sound of the machine is normal at any time. In case of screams and strange sounds, stop the machine for inspection and elimination, and do not use it reluctantly.