These Master Understand, The Operation Of The Number Of Grain Machine Can Be Completely Started

These Master Understand, The Operation Of The Number Of Grain Machine Can Be Completely Started

Grain counting machine for the research and development of high-tech products!You can count both tablets and several capsules!Truly achieve one machine dual-use!Mainly used for small-scale quantitative packaging of capsules and tablets, it is very suitable for small and medium-sized batch experiments and production of pharmaceutical factories, scientific research institutions and laboratories.

At present, although the application range of digital granularity machine is very wide, but many people do not know how to operate correctly, and many details in the operation process are not clear.Today, I would like to give you a detailed introduction.Its correct operation is divided into the front operation, after the operation and after the operation.Before operation, the user should check whether the glass turntable and vibrator have stopped; check for other sundries on the glass turntable and unloading tank; adjust the particle opening, adjust the tracker; adjust the height of the riser to lock the positioner.After that, turn on the power and set the quantity parameters required for the production process.Note that the turntable and vibrator start slowly and check that the particles slide smoothly.If you all meet the requirements, then you can operate.

During operation, the emission of vibration particles shall match the speed of the turntable in operation, and it shall be noted that any material shall not accumulate on the disk, so as not to block the track.If the material is too much, it can easily overlap or block in the tracker, with inaccurate counting.The control signal preset of the self-stop circuit is closed through the switch diode and the relay, cut off the count input, count the input terminal to the ground, and stop the feeding count.

In addition, users should pay attention to the operation of the grain counting machine, otherwise it may not work properly; when lifting the machine, do not lift it on the counter board, otherwise the counter board will be loose and damaged; the buckle on the counter must be adjusted to the appropriate height.The bottom edge should be kept a appropriate distance from the head of the particles, too low or too high will damage the particles.Material particles must be fully locked and consistent in length.There must be unqualified particles, otherwise it will affect the quantity and quality of particles.

Buying high quality granmachine is the basic condition for users to ensure the quality of the count.However, during the use process, due to improper operation or errors, some users will directly use it, or do not pay attention to the details during the operation process.Counting equipment must be operated correctly, and some details must be paid attention to in order to achieve a good counting effect and ensure high quality production.