The Importance Of The Accuracy Of The Counting Machine

The Importance Of The Accuracy Of The Counting Machine

How important is the accuracy of the capsule tablet counter ? The dosage of each bottle of sugar coating, tablet and capsule is determined by clinical experiments, practice and data. Especially for a pharmaceutical factory with an annual output of 100 million tons, the cost difference due to different precisions is simply worlds apart. Of course, more importantly, it has a negative impact on consumers. In recent years, counting machine manufacturers have measured the quality of counting machines with precision, and striving for perfection is the gold standard for making counting machines.

On the other hand, in the long-term production practice, the accuracy of the counting machine is not only the production accuracy of a few grains, but also the stability of the counting machine, which is also the core standard for evaluating the quality of the counting machine. Simply put, it is the counting machine: the two indicators of accuracy and stability.

How to improve the accuracy and stability of the counting machine?

It has to be determined by specific statistics. This figure brings a more intuitive. Second, just one number is not enough. We also need to continuously record and test the accuracy of several particles, and calculate and analyze data sources rationally.

1. The technician should preheat the machine according to the operation steps before starting the machine, or during the operation of the machine, the technician should replenish the material in the silo in time. If not, it will affect the separation state of the material on the vibrating plate. Factors can cause incorrect product counts.

2. The three-stage vibration plate used in the production of capsules and pills in the tablet counting machine is set to a completely different vibration frequency. Or when making tablets and capsules, the accumulation of dust in the detection channel will block infrared rays, so that the tablet counting circuit cannot work normally.

3. The quality of the compressed air will affect the accuracy of the count. Compressed air with high water content has a great influence on the sensitivity of the actuator cylinder. Once the sensitivity of the cylinder is reduced, the counting accuracy cannot be guaranteed.

4. The influence of warehouse door setting, three-stage vibration plate vibration frequency setting, product length and parameter setting, prediction value setting, counting speed and speed setting. Separation speed setting.

5. As the actuator of the counting machine, its reaction speed directly affects the counting accuracy. Moisture in the compressed air, non-cylinder grease, impurities entering the cylinder, air leakage of the cylinder, and air leakage sealing are the reasons for the decrease of the sensitivity of the cylinder.