Do Not Know How To Use The Counting Machine? May Be These Problems

Do Not Know How To Use The Counting Machine? May Be These Problems

The counting machine is mainly used for small batch quantitative packaging of capsules and tablets, and is very suitable for small and medium batch experiments and production in pharmaceutical factories, scientific research institutions and laboratories. The counting machine is suitable for items of different sizes and can distinguish between fragments and fragments. At the same time, materials can be taken out in small piles to avoid waste of production capacity. There is no need to split into one-way lanes or separate. The single-layer vibrating plate feed and integrated channel greatly increase the feed density and production capacity, without the need for high-speed gates, avoiding the risk of gate tableting, no requirements for the cleanliness of compressed air, and compact volume.

At present, although the application range of the counting machine is very wide, many people do not know how to operate it correctly, and many details in the operation process are not clear. Its correct operation is divided into pre-operation, post-operation and post-operation. Before operation, the user should check whether the glass turntable and vibrator are stopped; check whether there are other sundries on the glass turntable and discharge chute; adjust the size of the particle opening, adjust the tracker; adjust the height of the riser to lock the positioner. After that, turn on the power and set the quantity parameters required for the production process. Note that the turntable and vibrator start slowly and check that the pellets slide smoothly. Can run if all requirements are met.

During operation, the signal emission of the counting machine should match the speed during operation, and be careful not to accumulate any substances in the vibration tank, so as not to block the channel. If there is too much material, it is easy to overlap or block in the tracker, and the counting is inaccurate. The control signal of the self-stop circuit is closed through the switch diode and the relay preset, the counting input is cut off, the counting input is grounded, and the feeding and counting are stopped.

In addition, the user should pay attention to the operation of the counting machine, otherwise it may not work properly; when lifting the machine, do not hang the machine on the counter board, otherwise it will cause the counter board to become loose and damaged; the snap ring on the counter must be adjusted to a suitable height . the

Purchasing a high-quality counting machine is the basic condition for users to ensure the counting quality. However, in the process of use, due to improper operation or mistakes, some users will use it directly, or do not pay attention to details in the process of operation. The counting equipment must be operated correctly, and some details must be paid attention to during the operation, in order to achieve a good counting effect and ensure high-quality production.