Tablet press the main structure, and use is introduced

Tablet press is mainly used for tablet technology research, the pharmaceutical industry is the granular material compressed into less than 13 mm diameter circle, abnormity and with characters, symbols, graphics flakes of automatic continuous production equipment. Tablet press punch and die pressure is very big, in the process of tablet commonly used bearing steel production, and heat treatment to improve its hardness. A lot of type punch, punch is determined by the shape of pills required shape. According to the punching die structure can be divided into circular shape, abnormity; Punch the shape of the section are flat, bevel edge shape, shallow concave, deep concave and comprehensive form, etc. Planar shape, hypotenuse punch is used to suppress flat cylinder shape tablets, shallow concave to neutralize biconvex tablet, deep concave is mainly used in crushing coating tablet chip, integrated form is mainly used for pressing tablets form. To facilitate the identification and taking drugs. On the die face can also print out the name of drug, dose, and vertical and horizontal lines, etc. Suppression of different doses of the tablets, should choose appropriate to the size of the die.
 
 In addition, the turntable on the punch machine for tablet press is required on the structure, improve the requirements on die because punch on the need to bring the directional keys, in the process of installing punch is to coordinate with the turntable. Down rod in working process without leaving the die hole, is don't need to do other processing. With different die pressing tablet punch is not can free rotation, but along a guide rail for lifting up and down movement, when the turntable driven push rod with guide rail sliding friction, so then punch with guide rail wear each other.
 
 In tablet press in use process, need to check parts, for 1 to 2 times a month, check the project for the worm gear, worm wheel, crankshaft, up and down the path, bearing, pressure guide part in various activities such as flexible rotation and wear, finding defects should be timely repair use.
 
 A after use or shutdown, should remove the residual powder, clearing the residual FenZi machine parts. Such as stop using for a long time, must all die will be removed, and will wipe and clean all machine, parts of smooth surface coated with anti-rust oil, cloth canopy cover good, convenient to use next time.
 
 Die maintenance shall be placed in a special box, die all into oil, and to keep clean, do not rust and bruised, best can customize special box to each kind of specification is packed in a wooden case, can avoid the wrong caused when using and helps to grasp the damage situation.
 
 Use place should be cleaned regularly clean, especially for medical and edible tablet manufacturing more grey sand, fly ash should not exist.
 
 Electrical components should be paid attention to the work environment conditions, such as temperature, humidity, etc., in a good environment, to extend the service life of parts. Pay attention to regular maintenance check, maintain good running state. Cooling fan should be regularly use compressed air to remove dust.
 
 Electrical components repair, should be performed by the professional and technical personnel, especially the frequency converter should be careful, under normal circumstances should send professional factory maintenance, must not tear open outfit.