Laboratory tablet press

Laboratory tablet press

Guangdong Rich Packing tablet press: the laboratory powder pressing machine is a small electric continuous press machine. It can press all kinds of granular, crystalline or fluidity powder raw materials into disc, cylindrical, spherical, convex, concave, etc. Suitable for pressing Chinese medicine tablets, western medicine tablets, chewing tablets, calcium tablets, buccal tablets, Spirulina tablets, milk tablets, candy tablets, effervescent tablets, camphor pellets (sanitary balls), aromatic tablets, flavor blocks, disinfection tablets, catalysts, fertilizer tablets, pesticide tablets, button batteries, electronic components, metallurgical powder ceramics, etc. The depth of filling and thickness of material can be adjusted. Various shapes of molds can be supplied according to customer requirements.

Matters needing attention in experimental tablet press

1, carefully read the instructions before using the machine before using it first, then use it again.

2. The machine can only operate in a certain direction (see the arrow on the handwheel or protective cover), not reversed, in order to avoid damage to the machine parts. Attention should be paid to pressing adjustment without negligence.

3, belt tightness regulation: through the two adjustment nuts on the mechanical and electrical floor. Pay attention to locking when adjusted.

4, when the power supply is pressed, the triangle belt should be removed to reduce resistance and wear. But do not remove the big pulley, because the large pulley has the function of saving the power of the flywheel.

5, when the electric press is pressed, the handwheel must be pulled down to avoid hurting people when running.

6. Whether manually or electrically pressed, the upper punch rod should be in the rising position before starting and then start again. If the upside sheet starts at the descending position, it enters the middle mold sheet just starting. At this time, because the rotating speed of the machine has not risen up inertia is small, it is easy to Jack the car. That is to say, when the upper punch enters the middle die, the machine will stop running because of the resistance of the tablet. Because the load is large, it often damages the machine or burns the motor.

Friends who need lab press machine, please contact us.