About the coating machine, how much do you know

About the coating machine, how  much do you know

Firstly, the working principle  about the coating machine

To make the chip evenly coated with crystals on the surface as soon as possible, and to achieve the purpose of polishing, the syrup should be sprayed on the chips in the pot first, and then rotated clockwise through the pot to make the sugar-coated pieces roll, rub and grind in the pot. Make the sugar coating even. At the same time, hot air is introduced into the pot to quickly remove the surface water of the tablet sugar coating, and finally a uniform and smooth sugar-coated tablet is obtained.

This  machine is a common equipment for the sugar coating process, and rotates at a stable line speed of the pot body, so that the tablet forms an optimal parabolic curve in the pot, and the thickness of the sugar coating layer is uniform, the color is bright, and the process requirement of no pitting occurs.

Secondly, the machine features

(1) The machine is equipped with an eccentric wheel, and the available unit can adjust the inclination angle of the sugar coating pan according to the characteristics of the tablet.

(2) The worm and worm gear are used as the terminal output of the movement, and the operation is stable.

(3) The hot air assembly device is heated by electric resistance wire, and is divided into high and low temperature control, which is convenient to control.

Thirdly , the machine lubrication of the coating machine

The bearings and worms and worm gears in the gearbox are splash-lubricated. One of the uppermost bearings is lubricated with an oil cup, which should be refueled regularly. The gearbox changes oil every six months, HL20 in winter, HL30 in summer, and ZG-2 calcium grease in rolling bearings.