Instructions for use of rotary tablet press

Instructions for use of rotary tablet press

Please follow the following steps before use:

1. Check the quality of the die repeatedly before use, and check whether there are any missing edges, cracks, deformation and incomplete tightness, as well as whether the device is complete and good.

2. Check whether the powder of raw material is dry and the powder content in the particles should not exceed 10%. If unqualified do not press hard, otherwise it will affect the normal operation of the machine and service life and material loss.

3, for the first time commissioning should be needle placed 6, pressure regulator control instructions will FenZi inside bucket, turn the commissioning the handwheel by hand, adjust the filling and pressure at the same time, gradually increase to the weight of the tablet and the degree of hard and soft to fulfill the requirements of the finished product, and then start the motor, first to open the clutch, an official production operation, in the process of production, must to sample the quality of the tablets regularly, is in line with the requirements, adjust when necessary.

4, the choice of speed has a direct impact on the service life of the machine, due to the nature of the viscosity of raw materials and sheet size and pressure in the use of uniform provisions, the structure of the machine stepless speed change device, slow speed is suitable for pressing minerals, grass, large diameter, viscosity difference and other fast difficult to shape the material. Fast for pressing adhesion, smooth and easy to form materials. Therefore, the user must depend on the actual situation.

5. The management personnel must be familiar with the technical performance, internal structure, operating principle of the control mechanism and the working place during operation. In order to prevent failure and damage of the machine parts, it is necessary to ensure safe production.

6. Pay attention to whether the machine sound is normal at any time in use. Stop the machine to check and eliminate screams and strange sounds, and do not force it to be used.

Gear lubrication

1, the general parts of the machine lubrication, in the appearance of the parts are equipped with oil cups and nozzles, according to the type of oil cups, respectively, with butter and oil, before starting use should be all refueling once, halfway can be added according to the temperature rise and operation of each bearing.

2. The glass oil cup with the top cover is used to lubricate the rotary table and bearings at 2-4 drops per minute during operation.

3, the screw cap oil cup on the worm is lubrication worm gear, in the operation of the actual lubrication plus.

4, both ends of the transmission shaft with rolling bearings, shaft shell with oil nozzles, can be refueled every two weeks, oil gun pressure.

5, the end of the rod and curve rail guide with butter lubrication, pay attention to not too much, to prevent oil seeping into the powder and affect the quality of the tablet.

6. Pay attention not to spill the oil outside the cup, not to flow to the surrounding area and the ground of the machine, because the oil can easily stain the materials and affect the quality of the tablet.

Guangdong Rich Packing professional rotary tablet press, there is a need for friends please contact us.