Electronic cigarette aluminum plastic blister packaging machine introduction

Electronic cigarette aluminum plastic blister packaging machine introduction

The electronic cigarette(pod cartridge) aluminum-plastic blister packaging machine is a packaging material of non-toxic PVC hard sheets and PTP aluminum foil coated with non-toxic adhesive, and granules of various shapes and specifications are packaged in the form of blister sheets. The heating softening of the PVC rigid sheet and the PTP aluminum foil is automatically and continuously realized by a small-diameter internal heated contact roller heater.

Compared with the universal packaging machine, its outstanding feature is a roller-type suction molding roller with a small-diameter negative pressure forming, which has a heat-softened PVC rigid sheet which is sucked out of the blister through the blister mask hole of the roller surface. And cooperate with the heat sealing roller to complete the two functions of heat sealing together with the heated PTP aluminum foil and the PVC hard sheet, and then after heating and typing, enter the punching and punch out the finished product. It is mainly used in blister-type aluminum-plastic packaging of capsules, tablets, syringes, foods and other articles of various specifications in pharmaceutical, hospital, food, electronics and other industries.

According to different molding methods, the electronic cigarette(pod cartridge) aluminum-plastic blister packaging machine can be divided into drum type and flat type, the flat type positive pressure forming effect is better than the drum type vacuum forming; according to the heat sealing method, it can be divided into the drum type hot pressing sealing and the flat type heat. Press-sealing, flat-plate hot-press sealing is better than drum-type hot-press sealing, and drum-type hot-press sealing is superior to flat-plate hot-press sealing in terms of speed and reliability.

According to the industry's production experience, it is easy to find problems in the formation of blister, heat sealing and sealing in the use of the aluminum-plastic blister packaging machine. The author briefly describes how to solve these problems according to the relevant data collection.

Blister forming problems. According to industry experts, according to the blister forming method, the PVC film/(hard sheet) is heated and passed through a mold and compressed into air or vacuum to form a blister of a desired shape and size, so that when the formed blister has a problem, it is required. Start from the following aspects:

Whether the PVC film/(hard piece) is a qualified product; whether the temperature of the heating device is too high or too low; whether the surface of the heating device adheres to PVC/; whether the molding die is qualified, whether the molding hole is smooth, whether the air hole is smooth; the cooling of the molding die Whether the system works normally and effectively; whether the vacuum degree and exhaust rate of the drum type negative pressure forming can reach the normal value, and whether the pipeline has abnormal loss; whether the compressed air of the flat positive pressure forming is clean and dry, can the pressure and flow rate be When the normal value is reached, the pipeline has abnormal loss; whether the flat positive pressure forming mold clamps the PVC/belt in parallel, and whether there is air leakage.

Hot pressing sealing problem. The insiders pointed out that in the hot-press sealing process of the drum type aluminum-plastic blister package, the PVC/belt and the aluminum foil are engaged by a mutually parallel roller-shaped heat sealing roller and an anilox roller under a certain temperature and pressure. Roll it to complete the heat sealing. The contact between the heat seal roll and the anilox roll is a linear contact and the required pressure is relatively small.

In the hot-press sealing process of the flat-panel electronic cigarette(pod cartridge) aluminum-plastic blister package, the PVC/belt and the aluminum foil are completed by the flat parallel heat-sealing plate and the anilox plate in the same plane under a certain temperature and pressure. Heat sealed. The contact between the heat seal plate and the anilox plate is in a planar contact, and the required pressure is relatively large. Whether it is a drum type or a flat type heat sealing, when the heat seal is formed, the texture is not clear and the texture is not shallow.

In addition, if the above solution still can not solve the problems of aluminum-plastic blister packaging machine, buyers can contact Guangdong Rich Packaging Machinery Co., Ltd. for consultation, our service team will provide professional answers.