Precautions for use of high-speed rotary tablet press

Precautions for use of high-speed rotary tablet press

The high-speed rotary tablet press is used to press various granular materials into wafers and shaped sheets, which is a basic equipment suitable for mass production. The structure is double-pressed, with two sets of feeding devices and two sets of wheels. 33 dies can be loaded on the turntable, and 66 pieces can be pressed after one rotation. The speed of the turntable, the filling depth of the material, and the thickness of the tablet can be adjusted during tableting. The mechanical buffer on the machine can avoid damage to the machine caused by overload. There is a suction box inside the machine. The nozzle can absorb the dust generated when the machine is rotated, avoiding the adhesive blockage, and recycling the raw materials for reuse.

Precautions for use

1. Do not remove the protective cover, safety cover, etc. on the machine and equipment, and install it when using it.

2. The die must undergo strict flaw detection test and shape inspection. It should be crack-free, deformed, missing, and the hardness is suitable and the size is accurate. If it is not qualified, do not use it to avoid serious damage to the machine.

3, the feeding device and the turntable surface are flat, high and low accuracy, if high, it will cause leakage of powder, and at low, there will be copper chipping, which will affect the quality of the tablet.

4, do not use more raw materials, because it will make more flying powder, more leakage under the impact, affecting the wear and tear of the parts and the loss of raw materials.

5, do not use raw materials, because it will make the powder stick to the punch surface

6. If there are jumps or stagnation during operation, do not use your hands to avoid accidents.

7. Drive the motor first, and then start the clutch after the operation is normal.

8. If the machine vibration is abnormal or abnormal noise occurs during use, stop it immediately.

9, the use of medium pressure should not be too large, generally measured by the load of the motor, with a 380 volt motor in the tablet when the heavy-duty current is not more than 4 amps is normal.

10. The difference in tablet weight is increased. In the process of adding the film, the difference in weight cannot exceed the limit prescribed by the Pharmacopoeia, and it is acceptable. However, in the process of tableting, the difference in tablet weight is often found to increase.

Guangdong Rich Packaging Machinery Co., Ltd. is a professional manufacturer of tablet presses. It has rich domestic and international sales experience and debugging experience. It is a good supplier of tablet presses in the industry. The company's address is located at Room 2315, Dart International Center, No. 362, Jiangnan Avenue, Haizhu District, Guangzhou, Guangdong Province. Welcome customers and dealers to visit. Tel: 020-2089625220