High speed rotary tablet press machine

High speed rotary tablet press machine

1. Before use, the high-speed tablet press shall repeatedly check the quality of punching die, check whether there are missing edges, cracks, deformation and tightness not meet the requirements, and check whether the device is complete and good.

2. Particle tablet press shall check whether the powder of particle raw materials is dry and the powder content in the particles should not exceed 10%. If unqualified, do not use it hard, otherwise it will affect the normal operation of the machine, service life and loss of raw materials.

3, the first trial pressure regulating control instructions needles should be placed on the "0" position, the material into the hopper, turn the commissioning the handwheel by hand, adjust the filling and pressure at the same time, gradually increase to the weight of the tablet and the degree of hard and soft to fulfill the requirements of the finished product, and then drive motor, first to open the clutch, an official production operation in the process of production, must to sample the quality of the tablets regularly, is in line with the requirements, the adjustments if necessary.

4, the speed of high-speed rotary tablet press choice has a direct effect on the lifespan of the machine use, due to the nature of the raw material viscosity and diameter size and pressure on the use of cannot be uniform, the structure of high speed tableting machine with pulley transformation methods are divided into fast and slow, slow in Yangtze river delta drive outside the rope round, apply to the suppression of mineral, Chinese herbal medicine such as molding material hard, fast with short triangular driving rope wheel, suitable for suppressing adhesion, good lubricity and ease of molding material, so the user must according to actual situation.