HOT PRODUCTS
Details
Home
> NEWS
> Industry News > Details
The Solution of Rotary Press Can't Turn Freely
The Solution of Rotary Press Can't Turn Freely
Usually after the pressing, we have to take down the ups and downs, in this process, it is easy to suddenly can not idle, I believe that you have encountered such a situation in the process of operation. Generally speaking, there are two reasons for sudden non-idling, one is that parts fall into the transmission parts, the other is that more particles fall into the transmission parts.
Cause 1: Parts fall into transmission parts
This situation usually occurs in the process of upstream and downstream punching. In the process of disassembly and punching, some smaller parts (such as screws and nuts) will inadvertently fall into the transmission parts, which hinders the rotation of gears. Equipment managers can try to reverse, and if they are still stuck in a certain position after the reverse, it is more likely.
Cause 2: More particles fall into the transmission parts
Rotary tablet press is to press different materials, so there will be many materials with smaller particles or sheets, which will fall into the transmission parts due to vibration in the process of tablet pressing. Particles or sheets that fall into it will form solids by mixing grease, thus affecting the operation of the equipment. If it is powder compaction, this possibility is also greater.
Guangdong Ruiqi specializes in the production of tablet presses. Rotary tablet presses and high-speed rotary tablet presses are needed. Please contact us for laboratory small tablet presses.
