HOT PRODUCTS
Details
Home
> NEWS
> Industry News > Details
Working principle of automatic capsule filling machine
Working principle of automatic capsule filling machine
During the operation of the machine, the capsules in the capsule barrel will enter the feeding plate vertically one by one in the first position. First, push the horizontal fork to the outer end of the correction block, then push the vertical fork and vacuum suction into the mold hole, and separate the cap and body. In the second spare time, the module descends and moves. The third station is equipped with a pellet device, which can be filled with slow-release pellets. The fourth station is powder filling. After five times of filling and compression, the powder in the chamber is pushed into the capsule body. The fifth station is the reserved extension station. The sixth station uses the vacuum pipe to remove the residual capsules which are not separated from the cap body and suck them off. The lower module of the seventh station moves inward and rises at the same time. The eighth position lock push rod rises to lock the filled capsule. The ninth station will lock the capsules and push them out for collection. The 10th vacuum cleaner cleans the die hole and then enters the next cycle again.
