What are the precautions for using the tablet press machine?

What are the precautions for using the tablet press machine?

Machine maintenance
1. Regularly check the machine parts and carry out 1-2 times a month. The inspection items are whether the worm gear, worm, bearing, pressure wheel, crankshaft, upper and lower rail guides are flexible and wearable. The defects should be repaired and used in time.
2. When using it once or when it is stopped, remove the remaining powder and brush off the residual powder of each part of the machine. If the deactivation time is long, all the dies must be removed, and the machine should be wiped clean. The smooth surface of the machine is coated with anti-rust oil and covered with a cloth.
3, the maintenance of the die should be placed in a special box, so that the die is all invaded into the oil, and to keep clean, do not make rust and bruise, it is best to customize the special box to install a box in each specification, can avoid use This can cause errors and help to grasp the damage.
4, the use of the site should be cleaned frequently, especially for the manufacture of medicine and edible tablets, it is more suitable to have gray sand, flying dust.
5, electrical components should pay attention to maintenance, regular inspection, to maintain good operating conditions. The cooling fan should periodically use compressed air to remove dust.
6, electrical components should pay attention to the working environment conditions (temperature, humidity), in a good environment, will extend the life of the components.
7, the maintenance of electrical components, should be carried out by professional and technical personnel, especially the frequency converter should be carefully engaged, under normal circumstances should be sent to professional manufacturers for maintenance.
8. Before the insulation test of the electrical parts of the machine, the main circuit control line of the inverter must be removed to avoid damage to the inverter by the insulation test. Refer to the inverter operating manual for the insulation test method for the inverter separately.