Maintenance instructions for powder tablet press machine

Maintenance instructions for powder tablet press machine

1. Regularly check the powder tablet press parts, 1-2 times a month, check whether the worm wheel, worm, bearing, pressing wheel, crankshaft, upper and lower guide rails and other moving parts rotate flexibly and wear, and repair the defects in time.

2. When the powder tablet press is used once or shut down, the residual powder shall be taken out, and the residual powder of the machine name part shall be brushed. If the machine is out of service for a long time, all the dies must be removed, and all the machines shall be wiped and cleaned. The smooth surface of the machine shall be coated with anti rust oil and covered with a cloth.

3. The maintenance of the die should be placed in a covered tin case, so that the die is completely immersed in oil, and it should be kept clean, so as not to rust and bruise. If the iron case can be customized to be packed in one case with each specification, it can avoid the wrong installation and help to master the damage situation during use.

4. The place where the powder tablet press is used should be cleaned frequently, especially for the manufacturing of medicine and edible tablets, it is not suitable for the existence of dust and flying dust.

Precautions for use of pharmaceutical tablet press

1. Before the first use, read the manual carefully against the actual machine, and then use it again.

2. The rotary tablet press can only be operated in a certain direction (see the arrow on the hand wheel or protective cover), and can not be reversed to avoid damage to the parts. Pay special attention to the adjustment of pressing plate, and do not neglect it.

Guangdong Ruiqi specializes in the production of tablet press. We have good 24-hour after-sales service. If you need, please contact us: 020-89625220132 5050 7609 (the same number of wechat QQ)