HOT PRODUCTS
Details
Home
> NEWS
> Industry News > Details
Troubleshooting of semi-automatic capsule filling machine
Troubleshooting of semi-automatic capsule filling machine
1. The vibration is not ideal, adjust the voltage.
2. The reed screw is loose, tighten the screw.
3. The capsule shell is arranged in the working platform plate, and the mouth is higher or lower. Adjust the height of the dislocation plate and the guide rail.
4. There are too many capstan (more than 3%) and the vibrator is not adjusted properly. Because the proper voltage is adjusted or the size of the capstan is not up to the specification, the qualified capstan is selected.
5. The capsule shell is stuck on the platen and cannot fall. Replace the capsule shell or adjust the position of the dislocation plate and the hole of the platen.
6. The mould cannot be reset in the track, the compression spring at the back end of the track is stuck or the capsule variant is stuck. Reinstall the spring or ejector rod, and push the stick to push the stuck capsule down.
7. The wear of the guide plate in the mold affects the low rate of capsule fit. Replace the new mold or loosen the positioning on both sides, fasten the positioning nails, change the capsule shape or wet, and replace the capsule shell.
