Email: manager@richpacking.cn, WhatsApp / Wechat : +86-13826093596


Details

Home  > NEWS  > Industry News > Details

How should capsule filling machine be maintained

Published:2020-05-09Author:Sources:Views:914

How should capsule filling machine be maintained

When the normal working time of the automatic capsule filling machine is long, those who have direct contact with the medicine should be cleaned up regularly.

 

Lubricating oil

The transmission mechanism under the working table of capsule filling machine should be regularly lubricated (grease) to reduce the wear of moving parts.

 

Check the oil quantity

The main drive reducer of small capsule filling machine should be checked once a month. If it is insufficient, the oil should be refuelled in time and the lubricating oil should be replaced once every six months. The lubricating oil should be changed once for each 3000h operation of the rotary table station dividing box. According to experience, 90# oil is generally used.

 

Safety clutch

Safety clutch is in the automatic capsule filling machine overload protection, when the normal load should not slip of the clutch, but due to the long time use also may appear the phenomenon of slippage, when the slippage phenomenon in a normal use, clutch round nut can be tighten, ensure the machine run properly in order to achieve the purpose of protection.

 

Vacuum separator

The vacuum separator of the vacuum system mainly plays the role of inhaling the capsule into the upper and lower modules and separating the cap and body in the filling of the powder automatic capsule filling machine. If the capsule cannot be separated from the cap and body, the subsequent filling will be impossible.

 

Drive chain

The transmission chain of small capsule filling machine should be checked once a week and added with proper grease. It is necessary to tighten it again. When the chain is too loose and needs to be tightened again, the tensioning wheel should be moved to adjust, but the chain should not be opened and the chain should not be separated from the sprocket, so as to avoid disrupting the movement order of the whole mechanism and preventing interference of the movement of the mechanism.


您好,是时候升级你的浏览器了!你正在使用 Internet Explorer 的过期版本,Internet Explorer 8 可以为你提供更快、更安全的浏览体验,提供更好的隐私保护。立即下载