Problems and solutions in the operation of automatic capsule filling machine

Problems and solutions in the operation of automatic capsule filling machine

According to the motion state, the automatic capsule filling machine can be divided into two types: intermittent motion and continuous motion. Taking the intermittent motion filling machine as an example, its filling position will have an important influence on the filling quality of the capsule. For example, the fourth station is a non pressure volumetric small particle filling device. In the process of GMP equipment verification, conditions should be created to verify from two aspects: on the one hand, the volume error of each volume bin in parallel and the consistency of volume change of each volume bin during production and commissioning; on the other hand, the physical properties of particles, such as fluidity, particle size distribution, viscosity, gravity, roundness, etc.

In addition to the influence of the working position on the filling quality, the fault of the automatic filling machine is not eliminated. Capsule manufacturers will encounter more or less the following situations when using the full-automatic capsule filling machine for production, such as the capsule shell cannot be separated; the head and tail of the capsule are concave; the capsule is rubbed and split; the difference of the filling amount is too large; the outlet of the finished product, the locking position, and the bearing blocking at the place where the waste capsule is removed, etc.

When the capsule filling machine meets the above situation, the equipment operator can solve it pertinently, or contact the equipment manufacturer to ensure the safe production of the capsule. Take the concave of capsule head and tail as an example. In case of this kind of situation, Guangdong Ruiqi technical personnel said that one kind of problem is the capsule itself, which can be solved by replacing the capsule. In addition, the operator can also check whether the height of the thimble needs to be adjusted at the thimble, so as to increase the stress area of the capsule.

The characteristics of hole plug filling, intermittent operation and frequency conversion speed regulation make it suitable for the work of powder or pellet capsule medicine, such as seeding, splitting, filling, (waste bag removal) locking, finished product output and so on. It is worth mentioning that the machine is also equipped with a protection device for human and machine safety. Computer control, stepless variable speed regulation and digital display also make it more convenient for customers to operate the equipment.

In addition, njp-1500d automatic capsule filling machine produced by Guangdong Ruiqi has compact structure, small volume and full sealing, which can ensure that the product is not polluted by lubricating oil and meets GMP requirements. According to the introduction of the enterprise personnel, "the under machine module realizes one-way straight-line movement through the double-sided cam, which is stable, stable and low in maintenance cost. It can realize the real sense of sealing, completely eliminate the pollution of the product, and ensure the quality and safety."