automatic capsule tablet blister packaging machine basic cleaning and maintenance

Basic cleaning includes:

1. After shutdown, the metering part should be cleaned in time. For example, the packaged products are salt tablet or sweet . It must ensure that the blanking tray and turntable are cleaned  to prevent corrosion.

2. For the heat sealing mold, it should be cleaned Basic cleaning includes:

1. After shutdown, the metering part should be cleaned in time. For example, the packaged products are granulated sugar or salt tablet. It must ensure that the blanking tray and turntable are cleaned after every working to prevent corrosion.

2. For the heat sealing mold, it need to be cleaned frequently to ensure the sealing texture clear and tight.

3. Electric photoelectric tracking eye, should also be cleaned regularly to keep away from error of cursor tracking.

4. The materials scattered on the tray need clean up in time to keep the parts clean.

5. Clean the dust in the electric control box of blister packing machine to prevent poor contact and other faults.

The transmission and moving parts of the newly installed machinery must be inspected and tightened within one week of use, and oil filling and maintenance must be carried out; after that, regular inspection and maintenance must be carried out every month.

Basic maintenance of blister machine:

1. Regularly check the screws at all parts of the blister packing machine to avoid relaxation.

2. Pay attention to the waterproof, moistureproof, anticorrosion and rat proof of all electrical parts. The electric control box of blister machine and terminals should be kept clean to prevent electrical failure.

3. The two heat sealing  cylinders should be in the open position when the blistering machine is shut down, so as to avoid scalding the blister packer materials.

4. Oil the gear mesh, bearing oil filling hole and moving parts of the blister pack machine regularly. When filling the lubricating oil, please notice not to drop the oil on the drive belt, so that the belt is not slipping or aging.

5. Clean the dust in the electric control box of alu pvc blister machinery regularly to prevent poor contact and other faults.

The transmission and moving parts of the newly installed blister machinery must be inspected and tightened within one week of use, and oil filling and basic maintenance must be carried out; after that, regular inspection and basic maintenance must be carried out every month.