HOT PRODUCTS
Details
Home
> NEWS
> Industry News > Details
processing of the automatic tablet press machine die
1. The general process of tablet press mould die is to first process, then cut (before heat treatment), then grind the surface, then press, quench and temper, then clean, then go to external grinding, centerless grinding, flat grinding, external grinding, polishing, inspection, and finally To packaging
2. Let’s talk about the most common tablet press mold and the cheapest tablet press mold first. Common bearing steel is used to process molds. The first few processes are not processed, and the dimensions are directly roughed (the next process is directly processed without direct tempering, such a process). The internal stress of the material cannot be eliminated. The subsequent process is also very rough
The mold process of high speed sheet tablet press is basically the same as above. Some manufacturers do not tempering after quenching, the internal stress of the material can not be eliminated, the finish of polishing the cup surface is inconsistent, and many details are not well controlled. Such as chamfer, R angle, polishing, non-main size and so on. Don't look at these small details, if you want to really do these details is difficult. The most critical quality problem is material and heat treatment (quenching).
4. foreign imported mold looks comfortable, like you see figure, appearance, very temperament of the beauty, ha. The details are very good and the consistency control of all dimensions is very good. The most important thing is that materials and heat treatment technology are excellent.
