Operation Procedure Of Powder Tablet Press Machine

1 Before using rotary tablet press, check whether there are quality problems in the mold, such as lack of edges, cracks and deformation, and check whether the various equipment of the tablet press is in good condition.

2 Check whether the original particles meet the requirements. The content of fine powder in the granules should not exceed 10%, so as not to affect the performance and life of the machine.

3 Before starting automatic tablet pressing, manually turn the pulley or press the button to test the pressure to ensure that the tablet meets the requirements. When the machine is up and running properly, it can be started up and put into production.

4 The rotary tablet press is equipped with a reverse button which can be used to check the holes into the mold during pressing or pasting. Only transient point movement is allowed to reverse the machine, otherwise parts will be damaged.

Please pay attention to the operation when using small tablet press. If there is abnormal sound, please stop checking and use after troubleshooting.

Notes on the use and maintenance of tablet press

1. Maintenance and protection of small rotary tablet press

Each part of the tablet press is equipped with an oil cup, which can be filled with lubricating oil or grease as needed. Type of oil cup. All oil must be added once before starting, and the temperature and operating conditions of the bearings must be increased during production.

2. Tablet Rotary Tablet Presser periodically checks whether each part is flexible and worn. If any defects are found, they should be repaired in time.

3. When using the automatic rotary tablet press or making it stop running, the powder remaining on all parts of the machine should be brushed clean; When not in use for a long time, the mold should be removed, the machine should be wiped clean, and the smooth surface of the parts should be coated with anti-rust oil.

4. Maintenance of automatic tablet press mold: scrub it clean, apply anti-rust oil after drying, and then put it in a suitable container to keep it clean and prevent bumping damage.

Two of them. Precautions for automatic rotary tablet press

1. When switching on the power, please pay attention to the rotation direction of the machine, do not reverse rotation; The machine is not damaged.

2. When debugging the machine, the power should be cut off to avoid personal injury.

3. The inverted point delivery button can only be used to release pressure during commissioning and observation or to flush it into the mold. Do not use at will, in order to avoid damage parts and cause accidents.

Before use, the protective cover and safety cover on the machine should be properly installed, and it cannot be removed.

5. The mold should be free of any quality problems, such as cracks, deformation, missing edges, etc., and should not use any substandard products, so as not to damage the machine and affect the quality of the tablet.

6. When adjusting parts or troubleshooting, the machine must be stopped to avoid personal injury.

27D tablet press is a new type of rotary tablet press developed by our company. High pressure, easy operation, easy maintenance. Tablet press is suitable for pharmaceutical, chemical, food and other industries. Tablet press can compress medicines, health care products, tablets and pills, and automatically compress tablets. The tablet weight is stable, the adjustment is sensitive, the powder tablet pressing equipment is high precision, the operation is stable. The powder tablet press adopts double pressure type with the same speed. The output is twice that of a single tablet press. It is equipped with 27 die sets, pressure up to 120kN, sheet diameter up to 25mm, production up to 55000 / hour, filling depth up to 35mm, sheet thickness up to 17mm.