Working Principle of 800C Automatic Capsule Filling Machine

1. Capsule activity

In the intermittent capsule filling machine, the movement of the capsule depends on the continuation of the divided box without continuous twisting. The filling volume of the capsule is mainly determined by the volume of the measuring disc hole.

In each capsule jump, the hollow capsule, the main board Mobile, the capsule enters the capsule groove, and then pulls out the capsule cap vertically through the fork, pulls out the top, and the bottom pulls out the module, and the capsule is used for vacuum suction, and then Send the module to the powder filling station.

2. Powder filling

The sensor in the powder ring holds the spiral feed rod above it, *add powder to make the powder ring maintain a constant height, intermittently twist at the measuring plate, five sets of tamping rods sequentially condense the powder in the hole of the measuring plate, in the filling station , Push the medicine column into the capsule. In the future, we will enter the status of capsule waste, capsule lock, completed capsule discharge, module cleaner, and then enter a new round of mission cycle time and time again.

Nowadays, with the continuous improvement of filling technology, the active capsule filling machine has become more and more automatic, and the filling speed is getting faster and faster. The filling volume per hour has increased from tens of thousands to hundreds of thousands or even hundreds of thousands. The production line conducts equipment confirmation and commissioning. After the equipment is abnormal, the problem should be found in real time and accurately, and accurate adjustments should be implemented to ensure the normal operation of the equipment, so as to improve the production efficiency and ensure the product quality; otherwise, once the equipment has a problem, major problems may occur. The number of defective products forms unnecessary Waste in a short period of time, causing the product pass rate to drop.