Operating Procedures For Aluminum Plastic Blister Packaging Machine

1、 Pre working conditions of aluminum plastic blister machine: the last production site clearance is qualified, and the indoor temperature and humidity are qualified. The personnel are qualified in hygiene and dress. The machine status is normal.

2、 Preparation before packaging of aluminum plastic packaging machine: prepare hard tablets, aluminum foil and API (such as powder and particles) suitable for the specifications of this packaging capsule before packaging, and check them. The cooling water system is supplied normally.

3、 The power circuit of double aluminum blister packaging machine shall be checked by a specially assigned person: use the power supply under safe and normal conditions. Check whether the machine is normal, such as: whether the operation is stable, whether the operation sound is abnormal, and whether the running parts are lubricated and stable. Check whether the fixed parts are loose. We should make a comprehensive and detailed inspection. To ensure the normal, safe and qualified packaging of the machine.

4、 Operating procedures, methods and precautions: strictly follow the machine instructions. A specially assigned person shall be responsible for and inspect the machine lubricating oil, packaging materials, preheating (temperature, time) operation and the state after operation.

5、 Mold adjustment and replacement of flat aluminum-plastic blister packaging machine: the adjustment and replacement of relevant sprocket, punching mechanism and other parts of the mold, the adjustment of heat sealing mesh wheel, the replacement of production batch number, the replacement of heating pipe and temperature sensor shall be operated by full-time personnel who have received special training and can operate accurately, and the operation status shall be checked to ensure good and normal operation.

6、 Troubleshooting of automatic blister machine: stop the machine in time in case of any fault. Report to the person in charge of production to organize professional full-time personnel to eliminate

7、 The electrical maintenance of automatic blister packaging machine shall be operated by professionals. Non professionals are strictly prohibited from contacting the power supply system to ensure personal and mechanical safety.

8、 The site shall be cleared in time after the packaging of this batch of drugs. Clean up the raw and auxiliary materials, packaging materials, semi-finished products and finished products of this batch of drugs, mechanical cleaning, cleaning, acceptance and approval by the quality supervisor, hang qualified marks, and make site clearance records.

9、 The maintenance, repair and maintenance of automatic aluminum plastic blister packaging machine shall be carried out according to the equipment use and repair operation procedures. A specially assigned person shall be responsible for it. Make records to ensure that the equipment is in normal operation.