Points Needing Attention For Capsule Filling Machine to Capsule Rejected And Lock Capsule

Points Needing Attention For Capsule Filling Machine to Capsule Rejected And Lock Capsule

The role of capsule machine waste capsule removal station is to separate the bad capsule discharge. The key here is to adjust the size of the vacuum negative pressure, not only to ensure that all the separated capsules can be removed, but also can not absorb the capsule cap in the module of the automatic capsule machine. Too small vacuum bad capsules can not be completely removed; Too much vacuum will suck the cap away, resulting in unnecessary waste and lower yield.

Capsule locking position of capsule filling machine is the encapsulation of filled capsules into the capsule body and capsule cap, which is an important step of capsule filling.

The common problems of the hard capsule filling machine include: capsule insertion and splitting, the main reason is that the module under the automatic hard capsule filling machine is not good, the capsule body and the capsule cap are not on the same Central Line when the capsule is locked, resulting in damage to the capsule body or the capsule cap; Poor locking condition, including capsule head, capsule damage, separation of finished capsule body and capsule cap. The damage of deflated head and capsule is mainly caused by the short locking length. The separation of capsule and capsule cap occurred during capsule transportation because the capsule was not locked because the locking length was too long. The locking position of automatic capsule machine can be adjusted up and down to improve the quality of capsule locking.

Before commissioning automatic capsule filling machine, the locking length of capsule should be measured to ensure that it is in the qualified range, so as to ensure the stable production of capsule filling machine and ensure the filling quality.