Matters Needing Attention For Capsule Filling Machine Capsule Rejected And Capsule Locking

Matters Needing Attention For Capsule Filling Machine Capsule Rejected And Capsule Locking

The function of the waste capsule removal station of the capsule machine is to discharge the poorly separated capsules. The key of automatic capsule filling machine here is to adjust the size of vacuum negative pressure. It is necessary to ensure that all unseparated capsules can be removed, and the capsule cap in the module on the automatic capsule filling machine cannot be sucked away. The vacuum is too small and the bad capsule cannot be completely removed; Excessive vacuum will suck away the capsule cap, causing unnecessary waste and reducing the yield.

The capsule locking station of the capsule filling machine is to sleeve the filled capsule with the capsule body and cap, which is an important step in capsule filling.

Common problems in this station of hard capsule filling machine include: capsule insertion and splitting, which is mainly due to the poor alignment of the upper and lower modules of the full-automatic hard capsule filling machine, and the capsule body and capsule cap are not on the same center line when the capsule is locked, resulting in the damage of the capsule body or capsule cap; Poor locking state, including capsule shrinkage, capsule damage, and separation of finished capsule body and capsule cap. The damage of the shrunken head and capsule is mainly caused by the short locking length; The separation of capsule body and capsule cap is due to the fact that the capsule is not locked due to the long locking length, and the separation of capsule body and capsule cap occurs in the process of capsule transportation. The capsule locking station of automatic capsule machine can be fine tuned up and down to improve the capsule locking quality.

When debugging the automatic capsule filling machine before production, measure the locking length of the capsule to ensure that it is within the qualified range, so as to ensure the stable production of the capsule filling machine and the filling quality.