The daily maintenance of linear vibrating screen

Because of the vibrating screen in the process of operation has been keep high frequency collisions with material, lead to the wearing parts, but if at ordinary times in the use of vibrating screen operation standardization, pay attention to maintenance.That would greatly extend the service life of vibrating screen.Guangdong Rich Packing Machinery Co., LTD., linear vibrating screen are summarized in daily production process need to pay attention to the point, help you better use of vibrating screen:

1, Before the start of: (1) Check whether there is any damage on the coarse mesh and fine mesh (2) Each group clamps is locking vibrating screen
2, Start: (1) Pay attention to the presence of abnormal noise in (2)Current is stable

(3) Vibration has no current is stable
3, Use: clean the machine after used
4, regular maintenance, regular check coarse mesh, reticula and spring without fatigue and damage, the fuselage parts damaged

due to vibration, the part of the need to add the lubricating oil must be lubrication.
5, Vibration: the model, the screen surface specification and number of sieve surface, mesh size, feed particle size, capacity, motor power, vibration frequency, double amplitude of these data, can let the search of the vibrating screen people have a more profound understanding.
6, The machine should be installed electric protection device.
7, Early in July and the machine is running, check the foundation bolt at least once a day, to prevent loosening.
8, When the motor rotation direction is not in conformity with the requirements, adjust the power phase sequence.
9, The motor should guarantee good lubrication, every run two weeks or so added lithium grease (ZL - 3) once, come on, by adding suitable amount of lithium grease oil cup.When using sealed bearing, motor is not installed oil cup.
10, The machine is running 1500 hours, should check bearing, if you have severe damage should be replaced immediately.
11, The machine is stopped again after a long time use, should be measuring insulation resistance, is used for 500 v megohmmeter, should be greater than 0.5 ohms.

If you can pay attention to comply with the maintenance notice at ordinary times, then can effectively prolong the probation of vibrating screen and reduce the failure rate, also sincerely hope that the broad masses of customers in the use of vibrating screen found maintenance tips after communication with us, make progress together.