Common troubleshooting of capping machine of tablet counting line

Capping machine is also called capping machine, capping machine or capping machine. It is mainly used to screw and loosen the cap of plastic bottles and glass bottles. Capping machine is widely used, is a very common packaging machinery, usually connected with tablet counting machine.

With the market packaging gradually strict, packaging style gradually diversified, people also put forward higher requirements on capping machine, the pressure of capping machine has strict size, from simple manual capping, to mechanical automatic capping, high, medium, low-grade products of different levels, to meet the needs of different capping customers. Screw caps on bottles of different materials.

The common problems and solutions of capping machine can refer to the following items:

1. The failure of automatic switch caused by the movement of microswitch or photoelectric switch can adjust the working position of position switch or photoelectric switch, or change the switch.

2. The starting current caused by the short circuit between the motor winding and the shell as well as the short circuit between the motor wire and the grounding wire can be detected. On the one hand, the motor can be inspected, and on the other hand, whether the relevant wire is loose.

3. If the acceleration time of the automatic capping machine is too short and the electric shock capacity exceeds the capacity of the frequency converter, the setting time of F001 value can be extended appropriately, and the capacity of the motor cannot be changed at will.

4. If the power supply voltage changes too much, it can be easily solved by inputting the power supply into the measuring reactor or appropriately reducing the power supply voltage.